ComplianceOnline

Register

Toll Free: +1-888-717-2436


customer care
Fax: +1-650-963-2556
Email: editor@complianceonline.com
Read Frequently Asked Questions

Medical Device: Risk Assessment and Mitigation through FMEA

Buy Now Section

This 90-minute presentation will discuss a structured way to mitigate risks with minimum cost. You will learn how to use FMEA to effectively estimate and assess risks in your medical device.

Speaker
Instructor: Dev Raheja
Product ID: 702321

Course "Medical Device: Risk Assessment and Mitigation through FMEA" has been pre-approved by RAPS as eligible for up to 1.5 RAC credits towards a participant's RAC recertification upon full completion.

Why Should You Attend:

Failure modes and effects analysis (FMEA) can be a helpful tool in risk management for medical devices, but it has several inherent traps that should be recognized and avoided. The standard has been recognized by FDA, and in Europe through ISO 14971. Therefore compliance to this standard is crucial not only in assuring the safety and reliability of medical equipment, but in meeting regulatory requirements as well.

This 90-minute presentation will discuss a structured way to mitigate risks with minimum cost. You will learn how to use FMEA to effectively estimate and assess risks in your medical device. We will cover design FMEA and process FMEA procedure and show how this methodology can be used for even complex systems.

Learning Objectives:

Participants will learn

Areas Covered in the Seminar:

Who Will Benefit:

Instructor Profile:

Dev Raheja, a respected and sought out expert on medical device and hospital care safety, draws on his 25 years of experience as a risk management and quality assurance consultant to provide medical device stakeholders with a systematic way to learn the science of safety and system reliability. He uses evidence-based safety theories and tools taken from the aerospace, nuclear, medical, and chemical industries to identify the combination of root causes that result in an adverse event. He applies analytical tools that can effectively measure efficiency, establish evidence between Lean strategies and customer satisfaction.

His focus is on using various types of innovations to encourage a culture conducive to high return on investment. He is the author of the books Assurance Technologies principles and Practices, and Safer Hospital Care. He has served as Associate Professor for the PhD degree in Reliability Engineering at University of Maryland during 1994-99.

Topic Background:

Between 1983 and 1997, 1 in 4 medical devices used software. Today, over 50% devices are run by software. Software governs everything from digital thermometers to pacemakers. The risks can be high and crashes can mean injury or death. A report recommends that the FDA develop procedures to ensure the safety and effectiveness of products before they go to market. This report concludes that many of the software-based devices — including some insulin pumps, infusion pumps that deliver medicine or food to patients intravenously, and defibrillators used in cardiac arrest — are cleared by the FDA through an accelerated process that involves little or no clinical testing. Therefore, companies must find their own way to assure robust validation.

Bookmark and Share
Refund Policy
"Registrants may cancel up to two working days prior to the course start date and will receive a letter of credit to be used towards a future course up to one year from date of issuance.
ComplianceOnline would process/provide refund only if the Live Webinar has been cancelled. The attendee could choose between the recorded version of the webinar or refund for any cancelled webinar. Refunds will not be given to participants who do not show up for the webinar. On-Demand Recordings can be requested in exchange. Webinar may be cancelled due to lack of enrolment or unavoidable factors. Registrants will be notified 24hours in advance if a cancellation occurs."
For substitution, please email editor@complianceonline.com or call +1-650-620-3937.

Auditing and Administrating Human Resource Policies and Practices - 80024SEM
FDA's GMP Expectations for Phase - 80039SEM

This training hasn't been reviewed yet.

Review this training

Training Options Training Duration = 90 Min
$299.00 Access Recorded Version Only
One Person - Unlimited viewing for 6 Months
(For multiple licenses contact Customer Care)
Recorded Link and Ref. material will be available in My CO Section
$549.00 Get Training CD Only
One CD is for usage in one location only.
(For multiple locations contact Customer Care)
CD and Ref. material will be shipped within 15 business days