ComplianceOnline

Pre-Demolition Engineering Survey

Instructor: Jon J. Pina 
Product ID: 702203
  • Duration: 60 Min

recorded version

$149.00
1x Person - Unlimited viewing for 6 Months
(For multiple locations contact Customer Care)
Recorded Link and Ref. material will be available in My CO Section
Last Recorded Date: Mar-2016

Training CD

$299.00
One CD is for usage in one location only.
(For multiple locations contact Customer Care)
CD and Ref. material will be shipped within 15 business days

Customer Care

Fax: +1-650-565-8542

Email: customercare@complianceonline.com

Read Frequently Asked Questions

This webinar will help you understand OSHA’s requirement for a pre-demolition engineering survey, including what documents to have in place, for renovation and complete demolition of buildings/structures.

Why Should You Attend:

Due to the significant number of fatalities, injuries, fires, spills/releases, and “near misses” in construction/demolition activities OSHA requires an engineering survey to be made by a “competent person”. That person may be a professional engineer (PE), certified safety professional with demolition experience, or a demolition contractor employee with adequate experience and communication/writing skills. The survey may be brief for small structures or extensive for large facilities.

Many construction projects involve the complete removal of all buildings and structures prior to constructing a building, especially in developed areas. Many commercial structures that are far from being condemned are simply demolished to replace it with a more modern and attractive building. Some buildings less than a decade old such as a convenience store, with no visible or suspected integrity issues are demolished and require at least a very brief engineering survey.

This webinar will help you understand OSHA’s requirement for a pre-demolition engineering survey for renovation and complete demolition of buildings/structures.

Learning Objectives:

  • Understand OSHA's subpart T.
  • Know what documents to have in place.
  • Reduce risk of unplanned collapses and injuries.

Areas Covered in the Webinar:

  • Photographs and descriptions of the structures and what to include in the descriptions.
  • Assess and quantify environmental hazards such as asbestos, lead paint, dielectric fluids transformers, capacitors, lubricants and oil filled equipment, etc. that may contain polychlorinated biphenyls (PCBs), mercury switches, battery packs, drums, tanks, laboratory supplies, etc. that are required to be removed – a Phase One Environmental Assessment Survey (ASTM) needs to be performed to identify a sampling plan
  • Phase Two Environmental Assessment that involves the sampling to characterize suspect contaminants.
  • Phase Three Environmental Assessment that involves the removal of the contaminants in preparation of the demolition.
  • Isolate and assure all power utilities or any potential energy sources are isolated or discharged as in the cases of capacitors.
  • Both demolition and construction contract bidders usually have to access the areas to take measurements and develop work plans in preparation to bid or perform work.
  • Demolition contractor employees may have to access structures to attach wire cables and make preliminary cuts in order “pull away” structures without destroying the integrity of the remaining portion of the structure. The use of mechanical means (shears and grapplers) are safest but are not always practical alone to remove portions of buildings without destroying or weakening the remaining portion to be saved.

Who Will Benefit:

This webinar will provide valuable assistance to all construction and demolition companies/ manufacturing sites with renovations. Those that would benefit most would be:

  • Construction contractors
  • Demolition contractors
  • Engineering companies
  • Environmental remediation companies

Instructor Profile:

Jon J. Pina, has spent over 13 years with the PA/OSHA Consultation Program. Jon holds a BS in Geoscience Education, MS in Geology, and MS in Safety Management, all from Indiana University of Pennsylvania, and has been a Certified Safety Professional since 1994. In addition to being a safety professional, Jon has worn many “hats” and has extensive industrial experience as a chemical plant operator, pipefitter, construction manager of large industrial construction and demolition projects, and corporate safety director.

Follow us :
Project Management in Human Resources - 80334SEM
Computer System Validation - Reduce Costs and Avoid 483s

Refund Policy

Registrants may cancel up to two working days prior to the course start date and will receive a letter of credit to be used towards a future course up to one year from date of issuance. ComplianceOnline would process/provide refund if the Live Webinar has been cancelled. The attendee could choose between the recorded version of the webinar or refund for any cancelled webinar. Refunds will not be given to participants who do not show up for the webinar. On-Demand Recordings can be requested in exchange.

Webinar may be cancelled due to lack of enrolment or unavoidable factors. Registrants will be notified 24hours in advance if a cancellation occurs. Substitutions can happen any time.

If you have any concern about the content of the webinar and not satisfied please contact us at below email or by call mentioning your feedback for resolution of the matter.

We respect feedback/opinions of our customers which enables us to improve our products and services. To contact us please email customercare@complianceonline.com call +1-888-717-2436 (Toll Free).

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product! Write review

Best Sellers
You Recently Viewed
    Loading