Your Shopping Cart
Multimedia home networks - Home network communication protocol over IP for multimedia household appliances

Document Number: IEC 62457 Ed. 1.0 en:2007
Language: English
Provider: ANSI
Shipping: Available for download - Link will be provided in My ComplianceOnline section
Language: English
Provider: ANSI
Shipping: Available for download - Link will be provided in My ComplianceOnline section
Price:
$339.00
Product Details
specifies the requirements for the interface between the Home Network Lower Layer for a country's home network of standalone-type household appliances and the TCP/IP Layer for cases where it is intended to introduce a TCP/IP Layer to each of the nodes comprising such home network of standalone-type household appliances. The specified interface in the Home Network Lower Layer consists of 2 portions, the TCP/IP Interface and the lower medium-specific Interface. Figure 3 shows the composition of the Home Network Layer and the standardized portions. In Annex C, this standard specifies the requirements for the lower medium-specific Interface One of these layers shall be IEEE 802.15.1, short-distance radio standard additional layers can be added in the future).
Customers Also Bought
- Connectors for frequencies below 3 MHz for use with printed boards. Part 3: Two-part connectors for printed boards having contacts spaced at 2.54 mm (0.100 in) centres and staggered terminations at that same spacing
Price: $87 BUY NOW - Connectors for frequencies below 3 MHz for use with printed boards. Part 4: Two-part connectors for printed boards having contacts spaced at 1.91 mm (0.075 in) centres and staggered terminations at that same spacing
Price: $87 BUY NOW - Connectors for frequencies below 3 MHz for use with printed boards. Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm (0.1 in) spacing
Price: $128 BUY NOW - Connectors for frequencies below 3 MHz for use with printed boards. Part 6: Edge socket connectors and printed board connectors with 2.54 mm (0.1 in) contact spacing for single or double sided printed boards of 1.6 mm (0.063 in) nominal thickness
Price: $158 BUY NOW - Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm
Price: $158 BUY NOW - Connectors for frequencies below 3 MHz for use with printed boards. Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2.54 mm (0.1 in)
Price: $235 BUY NOW
Product Reviews
This product hasn't received any reviews yet. Be the first to review this product! Write review
You Recently Viewed