Wheelchairs - Part 19: Wheeled mobility devices for use as seats in motor vehicles

ISO 7176-19:2008 applies to all manual and powered wheelchairs, including scooters, which, in addition to their primary function as wheeled mobility devices, are also likely to be used as forward-facing seats in motor vehicles by children and adults with a body mass equal to or greater than 22 kg. ISO 7176-19:2008 specifies wheelchair design requirements, performance requirements and associated test methods, and requirements for wheelchair labelling, presale literature, user instructions and user warnings. It applies to complete wheelchairs, including a base frame and seating system, as well as to wheelchairs equipped with add-on adaptive components designed to facilitate compliance with one or more of the requirements.

Other parts of this product are listed below:

Wheelchairs -- Part 1: Determination of static stability
Wheelchairs -- Part 2: Determination of dynamic stability of electric wheelchairs
Wheelchairs - Part 3: Determination of effectiveness of brakes
Wheelchairs - Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range
Wheelchairs - Part 5: Determination of dimensions, mass and manoeuvring space
Wheelchairs - Part 6: Determination of maximum speed, acceleration and deceleration of electric wheelchairs
Wheelchairs -- Part 7: Measurement of seating and wheel dimensions
Wheelchairs -- Part 8: Requirements and test methods for static, impact and fatigue strengths
Wheelchairs - Part 9: Climatic tests for electric wheelchairs
Wheelchairs - Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs
Wheelchairs -- Part 11: Test dummies
Wheelchairs -- Part 13: Determination of coefficient of friction of test surfaces
Wheelchairs - Part 14: Power and control systems for electrically powered wheelchairs and scooters - Requirements and test methods
Wheelchairs -- Part 15: Requirements for information disclosure, documentation and labelling
Wheelchairs - Part 16: Resistance to ignition of upholstered parts - Requirements and test methods
Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers
Wheelchairs -- Part 22: Set-up procedures
Wheelchairs - Part 23: Requirements and test methods for attendant-operated stair-climbing devices
Wheelchairs - Part 24: Requirements and test methods for user-operated stair-climbing devices
Wheelchairs - Part 26: Vocabulary