Internal Auditing to MDSAP: Concepts and Practices in Aligning the Internal Audit Program

Speaker

Instructor: Frank Stein
Product ID: 706565
Training Level: Intermediate to Advanced

Location
  • Duration: 3 Hrs
This course will give an introduction into the Medical Device Single Audit Program (MDSAP) and how to adjust your internal audit program. The introduction will give an overview about the requirements for the quality management system and how to conduct an internal audit with MDSAP requirements to check, if your quality management system meet all MDSAP requirements.
RECORDED TRAINING
Last Recorded Date: Nov-2021

 

$499.00
1 Person Unlimited viewing for 6 month info Recorded Link and Ref. material will be available in My CO Section
(For multiple locations contact Customer Care)

$599.00
1 USB is for usage in one location only. info CD/USB and Ref. material will be shipped within 15 business days
(For multiple locations contact Customer Care)

 

 

Customer Care

Fax: +1-650-362-2367

Email: [email protected]

Read Frequently Asked Questions

Why Should You Attend:

You should attend this webinar to understand, what how is MDSAP working in relation to your internal audit program and how to adjust your internal audit program and finally how to conduct an internal audit according MDSAP requirements.

This webinar will give you a clear structured overview and introduction, how to apply MDSAP-Requirements in your internal audit program and to conduct internal audits with MDSAP requirements. First you learn to identify the relevant requirements, second you learn how to implement the identified requirements into your audit program. The course based on the MDSAP Companion-Document, issued by the FDA.

Areas Covered in the Webinar:

  • What is the Medical Device Single Audit Program (MDSAP)?
  • Which Companies must have MDSAP?
  • Which Companies should have MDSAP?
  • How to setup and audit program under MDSAP?
  • How to conduct an audit under MDSAP?
  • How the MDSAP-Audit is working?

Frequently Asked Questions:

  1. Can ORA perform a surveillance inspection of a combination product at a firm participating in the Medical Device Single Audit Program (MDSAP)?
  2. How will MDSAP ensure that every RA has the same evaluation standards for the Auditing Organization?
  3. How do I find out more specific information on the documents, policies, and procedures used in the MDSAP?
  4. Can industry provide input into MDSAP documents or the program in general?
  5. What is the best way to determine what is expected of the Auditing Organizations with regard to multiple jurisdictions?
  6. Can Contract Research Organizations participate in MDSAP and What about Certified Quality Auditors?
  7. If an RA decides to change its GMP/QMS or Regulatory requirements, how will the changes be incorporated into MDSAP?
  8. Can an Auditing Organization contest an unfavorable recognition decision or a nonconformity and its grading?
  9. How do Auditing Organizations ensure that duplicate efforts are not performed during an audit of a manufacturer that sells in multiple jurisdictions?
  10. How are nonconformities that are identified during an MDSAP audit managed? What is the timeline for a manufacturer to respond to nonconformities?
  11. Where you mentioned outsourced processes are typically not audited via MDSAP, could we anticipate that there is a higher chance that the FDA could choose to perform an inspection of a contract manufacturer?
  12. Is the estimated durations what is recommended for internal audits as well as 3rd party?
  13. Would it be required to use the MDSAP grading of nonconformities when conducting the internal audit?
  14. Is a root cause analysis needed regardless of the finding grade?
  15. Can you please highlight country specific requirements?
  16. No. if there is a finding grade 5, understandably a root cause analysis is needed. What if it is a finding grade 1, not as severe?
  17. I understand the grading. Indirect not repeat without device on the market means 1 and it is typically not high risk.
  18. Where in the MDSAP documents is "repeat" defined? Is the assumption just the next time audited?
  19. Is "repeat" the second NC within the direct or indirect sections or the next time we are audited?
  20. Question came up during an internal audit - how to show compliance with Australian rule that design input must include Essential Principles when original product project was not thinking about Australian market. From what I heard you say, it seems that basic input is adherence to standards related to basic safety of device. Is this correct interpretation? Otherwise how does one remedy after the design phase when deciding to move into a new regulatory territory?
  21. Could that be a quality plan to review all design docs and fill gap?
  22. Do you grade and document a finding when there is already an open CAPA for it?

Who Will Benefit:

  • CEO’s of companies, which sell to Australia, Brazil, Canada, Japan or US
  • Regulatory Affairs Managers of Companies, which sell to Australia, Brazil, Canada, Japan or US
  • Quality Managers of Companies, which sell to to Australia, Brazil, Canada, Japan or US
  • Quality Representatives of Companies, which sell to Australia, Brazil, Canada, Japan or US
  • Other managers, which need to deal with regulatory or quality guidelines

Medical Device Manufacturers, who develop, manufacture and / or sell to US, CAN, BR, AUS, JP

Instructor Profile:
Frank Stein

Frank Stein
Senior Expert Medical Devices, Frank Stein healthcare projects

Dr. h.c. Frank Stein, medical engineer, medical engineering experience since 25 years, clinical and research experience in cardiac surgery and cardiology, industrial experience in ophthalmology, neurology, traumatology and dental implants, active implants, active devices, international project and regulatory consulting experience in Europe, North-America, Asia, Australia, Arabic Countries, Latin-America.

Follow us :

 

 

Refund Policy

Registrants may cancel up to two working days prior to the course start date and will receive a letter of credit to be used towards a future course up to one year from date of issuance. ComplianceOnline would process/provide refund if the Live Webinar has been cancelled. The attendee could choose between the recorded version of the webinar or refund for any cancelled webinar. Refunds will not be given to participants who do not show up for the webinar. On-Demand Recordings can be requested in exchange. Webinar may be cancelled due to lack of enrolment or unavoidable factors. Registrants will be notified 24hours in advance if a cancellation occurs. Substitutions can happen any time.If you have any concern about the content of the webinar and not satisfied please contact us at below email or by call mentioning your feedback for resolution of the matter. We respect feedback/opinions of our customers which enables us to improve our products and services. To contact us please email [email protected] call +1-888-717-2436 (Toll Free).

 

 

+1-888-717-2436

6201 America Center Drive Suite 240, San Jose, CA 95002, USA

Follow Us

facebook twitter linkedin youtube

 

Copyright © 2021 ComplianceOnline.com MetricStream
Our Policies: Terms of use | Privacy

PAYMENT METHOD: 100% Secure Transaction

payment method