Why Should You Attend:
If you are constantly struggling to create, manage, and maintain all of the information found in the various Risk Management documents and files, all of which are often redundant, repetitive, and clustered together in an awkward manner, this webinar is something that will give you a different perspective and a very different approach that you can use.
If your design and manufacturing resources are spending too much time on documentation and not enough time on actual risk management and mitigation, you as a manager need to be looking for ways to simplify the work at hand.
Areas Covered in the Webinar:
Who Will Benefit:
Managers, Supervisors, Directors, and Vice-Presidents in the areas of:
From Medical device and combination product biotechnology devicesInstructor Profile:
Jose Mora is a Principal Consultant specializing in Manufacturing Engineering and Quality Systems. For over 30 years he has worked in the medical device and life sciences industry specializing in manufacturing, process development, tooling, and quality systems.
Prior to working full time as a consulting partner for Atzari Consulting, José served as Director of Manufacturing Engineering at Boston Scientific and as Quality Systems Manager at Stryker Orthopedics, where he introduced process performance, problem solving, and quality system methodologies. During that time he prepared a white paper on the application of lean manufacturing methods to the creation and management of controlled documents and a template for strategic deployment.
Jose led the launch of manufacturing at a start-up urology products company as Director of Manufacturing for UroSurge, Inc. at the University of Iowa’s business incubator park in Coralville, IA, creating a world-class medical device manufacturing operation, with JIT, kanban systems, visual workplace and lean manufacturing practices.
Risk management overarches projects associated with a particular product family, given that risks will both remain and change as new design features and medical indications for use evolve with a particular device. Design control is not only a requirement of the QMS but risk management must be applied to the design control process itself.
During all phases of design controls and the design control process, any new consideration must be held up against the scrutiny of potential risk and harm to the health of people, damage to property, or to the environment during all stages of a product’s life cycle and supply chain.
Risk management is a process that involves many considerations, responsibilities, personnel, and the transfer of knowledge. Given that it transcends projects and even companies, it is particularly critical that key pieces of information survive these many hand-offs.
Registrants may cancel up to two working days prior to the course start date and will receive a letter of credit to be used towards a future course up to one year from date of issuance. ComplianceOnline would process/provide refund if the Live Webinar has been cancelled. The attendee could choose between the recorded version of the webinar or refund for any cancelled webinar. Refunds will not be given to participants who do not show up for the webinar. On-Demand Recordings can be requested in exchange. Webinar may be cancelled due to lack of enrolment or unavoidable factors. Registrants will be notified 24hours in advance if a cancellation occurs. Substitutions can happen any time.If you have any concern about the content of the webinar and not satisfied please contact us at below email or by call mentioning your feedback for resolution of the matter. We respect feedback/opinions of our customers which enables us to improve our products and services. To contact us please email [email protected] call +1-888-717-2436 (Toll Free).
PAYMENT METHOD: 100% Secure Transaction