FDA Regulations and Guidance Training - Live Webinars, Recordings & CDs

This presentation explores the basic concepts making up an ICH Q10 Quality System approach and steps to properly implement the concepts.

This Webinar will discuss how non-compendial biopharmaceutical analytical method transfers can leverage a risk-based approach to address Quality and Regulator concerns. Method transfers using a statistical equivalence approach with tight criteria as frequently suggested by regulators makes it difficult to transfer methods and can result in a high transfer failure rate.

This training program will guide attendees in implementing QbD principles from discovery through product discontinuation. It will also illustrate applying statistics to set specifications and validate measurement systems (assays) and discuss utilizing risk management tools to identify and prioritize potential critical process parameters.

This webinar will discuss some of the major issues in the regulation of cosmetics. Upon completion of the session attendees will learn how regulators regulate cosmetics compared to other categories, fine line between cosmetics and drugs, and future directions for cosmetic regulations.

This webinar training will benefit manufacturers of manufactured products to achieve an effective, robust and compliant SOP and STM which will result in a cost effective and efficient manufacturing and testing of products. A well planned and written SOP or STM will reduce the incidence of out-of-specification (OOS) results, failure, product non-conformances, deviation and invalid assay investigations.

This webinar will discuss FDA's current priorities and the agency's likely priorities and the future of regulations and policies in 2017 under the new Trump administration.

This webinar on biopharmaceutical raw material testing will discuss how to implement processes for the control of microbial contamination, establish microbial limits and mitigate the risk of contamination.

This webinar will discuss approaches to selecting vendors to perform manufacturing and testing activities as well as clinical study activities. The information obtained will enable implementation of an effective vendor selection program and a comprehensive vendor management and oversight program. The webinar will address aspects of requesting bids, performing audits, evaluating risks, and preparing plans and agreements for effective oversight and management.

This webinar will demonstrate how to use requirements tractability to systematically connect Engineering, Manufacturing and Risk Management processes, and how to systematically collect the objective evidence necessary to prove 21 CFR 820 compliance to the FDA.

This training program will discuss risk management and outline the requirements for applying risk management to the quality system. It will also discuss how to conduct and implement risk management practices at your firm and review communication techniques to highlight the benefits of risk management.

This webinar will review the CTD format and content requirements for the DMF. It will discuss the transition from other formats to the CTD/eCTD and technical requirements for eCTD submission.

Usability Engineering has become a major topic. The current standard tightens the linkage to risk management. In addition, there are changes in the US and EU approach, all of which find a basis in this standard. Attending this presentation provides the information you need to prepare for these major changes.

This FDA documentation webinar will explain the regulatory expectations for, and the proper design and maintenance of effective and compliant standard operating procedures (SOPs).

This 4-hr webinar will focus on product lifecycle concepts that are applicable to all of the FDA regulated industries. Learn the objectives, purpose and scope of the quality manual and how to can be adapted to each different business environment.

This webinar will explore the benefits of internet-based manuals/IFUs (instructions for use), as well as the products that are eligible to replace paper manuals with internet-based manuals, along with the compliance and business requirements for implementing eLabeling.

This Webinar will present the best practices for integrating medical device risk analysis into a quality system. This integrated processes spans new product development, design change, production, and post market surveillance for the lifecycle of the device. Objective evidence produced by the integrated processes can be used to demonstrate risk analysis compliance to 21 CFR 820 and ISO 14971 during an audit.

This webinar will provide an introduction into the DMAIC problem solving process and will show how DMAIC can be utilized to ensure that any process which requires an investigation to be performed can be thoroughly addressed and well documented.

This presentation gives you the essential information you need to write a successful plan. Many companies try to implement Risk Management using an inadequate Risk Management Plan. They often leave out required items or add additional, but unnecessary information. The Risk Management Plan is key to an efficacious project to ensure your device is safe and meets the regulatory requirements.

This webinar will focus on biological indicator usage for sterilization performance qualification in the pharmaceutical and biotech industry. Biological indicator preparation, including population and D-value resistance determination, is presented in depth. Understanding these details is critical to successfully choose a biological indicator and qualify a sterilization process.

This webinar will review the classic objections to Agile practices and explain how to overcome them. We will discuss real-world examples of medical device companies currently employing Agile approaches and understand how you or your company can gain similar benefits.