ComplianceOnline

FDA Quality and Safety Regulatory Compliance Training - Live Webinars, Recordings & CDs

CDISC Mapping 3: Compare and Contrast SDTM and ADaM Steps
19
/ Jun
Wednesday-2019

CDISC Mapping 3: Compare and Contrast SDTM and ADaM Steps

  • Speaker: Sunil Gupta
  • Product ID: 704302
  • Duration: 90 Min
This training program will assist anyone directly or indirectly responsible for the creation, content or validation of CDISC data sets, tables, and data lists used to support research, drug or medical device efficacy and safety in a regulatory submission. Professionals in the pharmaceutical, biotechnology and medical device industries who want to be Good Clinical Practices (GCP) compliant in relation to regulatory submission environment will benefit from this training. Effective and practical solutions to address real-world issues will be detailed.
* Per Attendee
$249
Annual Current Good Manufacturing Practices (cGMP) Training
26
/ Jun
Wednesday-2019

Annual Current Good Manufacturing Practices (cGMP) Training

  • Speaker: Kelly Thomas
  • Product ID: 705422
  • Duration: 60 Min
This webinar provides a basic understanding and fundamental principles of Current Good Manufacturing Practices and will fulfill the requirement of personnel involved in cGMP must have documented training of current Good Manufacturing Practices. This session will focus on the FDC Act and 21 CFR federal regulations as applied to cGMP.
* Per Attendee
$199
Good Documentation Practice and Record Keeping Regulations (FDA & EMA)
28
/ Jun
Friday-2019

Good Documentation Practice and Record Keeping Regulations (FDA & EMA)

  • Speaker: Dr. Afsaneh Motamed Khorasani
  • Product ID: 705583
  • Duration: 60 Min
In this webinar, we will discuss the definition, purpose, importance of GDP, General rules of GDP, GDP as it applies to laboratory notebook documentation, US Pharmacopeia General Chapter <1029>, and introduction “Good Documentation Guidelines”. We will also briefly introduce you to the European Union (EU) GDP, and its enforcement along with some observation samples from FDA.
* Per Attendee
$229
How to Achieve a Compliant and Effective Cleanroom Design and Facility Validation
28
/ Jun
Friday-2019

How to Achieve a Compliant and Effective Cleanroom Design and Facility Validation

  • Speaker: Charity Ogunsanya
  • Product ID: 703875
  • Duration: 90 Min
This training program will discuss designing an effective cleanroom facility validation protocol and report, when and how to transition into the routine environmental monitoring processes, how to maintain a state of control within the cleanroom, and the routine environmental monitoring and excursion investigation processes.
* Per Attendee
$249
Implementation and Management of GMP Data Integrity
3
/ Jul
Wednesday-2019

Implementation and Management of GMP Data Integrity

  • Speaker: Danielle DeLucy
  • Product ID: 705029
  • Duration: 90 Min
Attend this webinar to learn the regulatory expectations for data integrity during CGMP inspections. Also attendees will examples of data integrity pitfalls, • part 11 compliance data integrity issues, FDA citations related to data integrity and how to improve data integrity in a laboratory environment.
* Per Attendee
$249
Challenges of an Effective Change Control Program
10
/ Jul
Wednesday-2019

Challenges of an Effective Change Control Program

  • Speaker: Kenneth Christie
  • Product ID: 704638
  • Duration: 90 Min
This training program will provide attendees with a better understanding of current Quality System Regulations (QSR) require companies to maintain qualified equipment, utilities and facilities in a state of control. When changes are made to these items, the change must be documented, explained as to what will be done and the items that may be impacted. This webinar will also highlight what is expected, what to include in procedures and address the challenges faced by industry in trying to establish an effective and manageable program.
* Per Attendee
$249
Root Cause Analysis - Starting at the Beginning
10
/ Jul
Wednesday-2019

Root Cause Analysis - Starting at the Beginning

  • Speaker: John E Lincoln
  • Product ID: 701373
  • Duration: 90 Min
This failure investigation and root cause analysis training will present a repeatable methodology / defined systems, and simple tools that you can use to trace problems to their source and root cause. Attendees will get knowledge on Flow charts, Cause and Effect Diagrams, the 5 Whys, and other statistical tools to accomplish FI/RCA.
* Per Attendee
$249
How to Prepare a Standard Operating Procedure (SOP)?
11
/ Jul
Thursday-2019

How to Prepare a Standard Operating Procedure (SOP)?

  • Speaker: Dr. Afsaneh Motamed Khorasani
  • Product ID: 705131
  • Duration: 60 Min
This webinar will detail a step-by-step procedure on how to write a practical, effective and compliant Standard Operating Procedures (SOPs), review and revise SOPs and maintain compliance over the course of the SOP life-time.
* Per Attendee
$229
Human Error Reduction in GMP manufacturing
15
/ Jul
Monday-2019

Human Error Reduction in GMP manufacturing

  • Speaker: Ginette M Collazo
  • Product ID: 704107
  • Duration: 90 Min
This training program will offer attendees an understanding of human errors in GMP related environments, factors and causes, and control measures to be put in place to reduce the same.
* Per Attendee
$249
The Regulatory Expectations for Environmental Monitoring Programs
25
/ Jul
Thursday-2019

The Regulatory Expectations for Environmental Monitoring Programs

  • Speaker: Kenneth Christie
  • Product ID: 703648
  • Duration: 90 Min
Understand the importance of an effective environmental monitoring (EM) program and its place in your organization. This course will provide insights on regulatory requirements governing EM programs, contamination control practices, and common deficiencies cited by regulatory auditors when auditing EM programs.
* Per Attendee
$249
How to write SOP's that Avoid Human Error
7
/ Aug
Wednesday-2019

How to write SOP's that Avoid Human Error

  • Speaker: Ginette M Collazo
  • Product ID: 704418
  • Duration: 90 Min
This training program will address the common human errors and deviations related to the use of procedures. It will also offer best practices for writing SOP’s to reduce the likelihood of human errors.
* Per Attendee
$249
Current Regulatory Requirements for Sterile Products
13
/ Aug
Tuesday-2019

Current Regulatory Requirements for Sterile Products

  • Speaker: Kenneth Christie
  • Product ID: 703672
  • Duration: 90 Min
This webinar will highlight and summarize the main components relating to current validation requirements for sterile products and include the following; review of the current regulations and guidance documents, the typical expectations when aseptic processing is involved, the expectations for protocols used to document the qualification of associated equipment, utilities and processes, and recently cited regulatory deficiencies.
* Per Attendee
$249
Understanding Aseptic Technique and Cleanroom Behavior
14
/ Aug
Wednesday-2019

Understanding Aseptic Technique and Cleanroom Behavior

  • Speaker: Danielle DeLucy
  • Product ID: 704429
  • Duration: 60 Min
This training program will discuss how, in sterile compounding, aseptic technique is contributing to the prevention of microbiological contamination. It provides sterility, safety, and efficacy to the sterile product, especially various injections for patients. In this course, cleaning, gowning and proper methods of contamination control will be reviewed along with why clean rooms are designed the way they are.
* Per Attendee
$229
CGMP controlled Raw Materials
15
/ Aug
Thursday-2019

CGMP controlled Raw Materials

  • Speaker: Charity Ogunsanya
  • Product ID: 705148
  • Duration: 90 Min
This webinar will help the attendee gain an understanding of the appropriate way to design the processing of all cGMP Controlled raw materials that are used for the manufacturing of drug product. The scope of this webinar applies to all cGMP controlled raw materials that are received, requiring testing, release and issuance of specifications. It also applies to the processing of changes and retiring of previously issued controlled raw materials specification within the product manufacturing process. cGMP Raw materials that are used for product manufacturing has to be released for use in the production process. Guidance will be given as to the steps that every drug product manufacturer should follow in order to process all incoming cGMP controlled raw materials which includes the release for use in the manufacturing of products.
* Per Attendee
$249
CDISC Mapping 4: SDTMs and ADAMs Examples (80%/20% Mapping Rule)
21
/ Aug
Wednesday-2019

CDISC Mapping 4: SDTMs and ADAMs Examples (80%/20% Mapping Rule)

  • Speaker: Sunil Gupta
  • Product ID: 704313
  • Duration: 90 Min
This training program is intended for anyone directly or indirectly responsible for the creation, content or validation of CDISC data sets, tables, and data lists used to support research, drug or medical device efficacy and safety in a regulatory submission. Through case study analysis, the course will examine best practices to provide thoughts and ideas to develop or improve the CDISC mapping system.
* Per Attendee
$249
Recorded/CD
FDA’s Expectations from Supplier Management for GMP: Quality Agreements and More

FDA’s Expectations from Supplier Management for GMP: Quality Agreements and More

  • Speaker: Danielle DeLucy
  • Product ID: 704659
  • Duration: 60 Min
The FDA requires that manufacturers of pharmaceutical products have a documented process to assess its suppliers and contract manufacturers, that they have implemented that process, and that the process is effective. This training program will explore how having an effective supplier relationship management program will result in streamlining the supply chain, ensuring a more consistent level of quality components, materials and components, and be more cost effective to the manufacturer.
CD/Recorded
$299
Recorded/CD
U.S. Adverse Event Reporting Regulations for Drugs, Dietary Supplements and Cosmetics

U.S. Adverse Event Reporting Regulations for Drugs, Dietary Supplements and Cosmetics

  • Speaker: Norma Skolnik
  • Product ID: 704371
  • Duration: 60 Min
In order to market dietary supplements and OTC drugs in the U.S., reporting serious adverse events is required. It’s essential to understand these important FDA requirements to assure regulatory compliance and avoid an FDA warning letter or 483 audit issues.
CD/Recorded
$249
Recorded/CD
Supplier and Service Provider Controls: FDA Expectations

Supplier and Service Provider Controls: FDA Expectations

  • Speaker: Vanessa Lopez
  • Product ID: 704844
  • Duration: 120 Min
This training program will provide regulatory requirements (US) of 21 CFR Section 820.50 (purchasing control) for the medical device industry and illustrate the same with examples. It will furnish details on what purchasing/supplier control management systems should address.
CD/Recorded
$349
Recorded/CD
Handling OOS Test Results and Completing Robust Investigations

Handling OOS Test Results and Completing Robust Investigations

  • Speaker: Danielle DeLucy
  • Product ID: 704351
  • Duration: 90 Min
This webinar will review the regulatory requirements for investigating an OOS Investigation. The responsibilities of the analyst, the supervisor and QA will be discussed. A detailed flow chart will be used to help the attendees clearly understand the steps and the order in which they are to be performed. The structure of an Investigation report which properly documents the investigation will be discussed.
CD/Recorded
$249
Recorded/CD
Good Documentation Guideline (Chapter <1029> USP)

Good Documentation Guideline (Chapter <1029> USP)

  • Speaker: Dr. Afsaneh Motamed Khorasani
  • Product ID: 705130
  • Duration: 60 Min
This webinar will familiarize participants with USP Chapter <1029> on good documentation guidelines. This session will wrap up the general concept and will provide information as to what needs to be documented in certain records.
CD/Recorded
$299
Best Sellers
You Recently Viewed
    Loading