This webinar provides details regarding the generation of acceptance sampling plans often used in process validation and production control to ensure quality of final products. By attending this webinar, participants will be able understand the key inputs and issues involved in determining acceptance sampling plans. Sampling plans for attribute data are the primary focus although variable acceptance sampling plans are presented as well.
This 90-minute webinar will provide valuable assistance to all regulated companies performing and documenting meaningful, results driven 510(k) / change analysis activities, based on the FDA's new Draft Guidance, "510(k) Device Modifications: Deciding When to Submit a 510(k) for a Change to an Existing Device", dated October 25, 2017.
This training program will examine how human factors/usability is the analysis of how people interact with medical devices. The process of conducting rigorous human factors studies throughout the design process, integrating it with the device risk analysis and design process, and validating the effectiveness of the studies will be explained. The various types and methods of human factors analysis will be explained. This process conforms to the new ISO 62366 standard and the new FDA guidance document.
FDA regulates advertising and promotion material as labeling. The legal definition of labeling covers just about anything that explicitly or implicitly conveys a message intended to affect a person’s behavior and decision outcomes. How FDA applies its legal tenants of false and misleading information or variations on that theme requires continual updating by FDA and constant re-evaluation by industry. Now the regulatory landscape involves other federal agencies and academic principles in psychology. It has become very complicated and will prove very costly if you knowingly or unknowing walk into one of FDA’s legal snares. This webinar will bring attendees up to speed so you are clearer about what is a problem, what is not a problem and what becomes a risk laden judgment call.
This CAPA investigation training will discuss techniques used by the FDA to review your CAPA system. You will learn what the FDA tells their inspectors to focus in the QSIT document and how your company can use the same QSIT document to prepare for inspection.
This webinar will detail a step-by-step procedure on how to write a practical, effective and compliant Standard Operating Procedures (SOPs), review and revise SOPs and maintain compliance over the course of the SOP life-time.
This webinar will help the attendee gain an understanding of the appropriate way to design the processing of all cGMP Controlled raw materials that are used for the manufacturing of drug product. The scope of this webinar applies to all cGMP controlled raw materials that are received, requiring testing, release and issuance of specifications. It also applies to the processing of changes and retiring of previously issued controlled raw materials specification within the product manufacturing process. cGMP Raw materials that are used for product manufacturing has to be released for use in the production process. Guidance will be given as to the steps that every drug product manufacturer should follow in order to process all incoming cGMP controlled raw materials which includes the release for use in the manufacturing of products.
The FDA requires that manufacturers of pharmaceutical products have a documented process to assess its suppliers and contract manufacturers, that they have implemented that process, and that the process is effective. This training program will explore how having an effective supplier relationship management program will result in streamlining the supply chain, ensuring a more consistent level of quality components, materials and components, and be more cost effective to the manufacturer.
This webinar will provide you the information you need to create supplier quality agreements (QA Agreements) with key suppliers and to understand which of your suppliers should have these agreements to meet expectations of the FDA and ISO 13485 Notified Body auditors.
This session will include the requirements for all of the complaint handling responsibilities, which will include defining, documenting, and implementing a complaint-handling system, the requirements for complaint review, investigation, and corrective action, as well as ISO-specific implications. Also covered will be a discussion of what constitutes a complaint, and recommended practice on how to handle "non-complaint" feedback. Also covered will be the application of risk management to a complaint handling system, and a specific risk management system explained.
This 90-minute webinar will examine in detail the U.S. FDA and EU MDD requirements for DHFs, DMRs, DHRs, and TF/DDs - their formats, content, and their commonalities, differences, interrelationships, and similarities.
This webinar will benefit medical device companies planning to have a CE mark under the European Union Directive 93/42/EEC. We will discuss what is new in ISO 14971:2019 and help you avoid delays in obtaining or maintaining your CE mark for compliance to the Medical device Directive, EU Directive 93/42/EEC on Medical Devices.
This session will discuss the requirements for Management Controls, including organizational structure, internal audits, establishment of a quality policy and confirmation it is being followed, establishment and contents of a quality system.
This life science product stability testing webinar will explain, in detail, the requirements of the FDA’s drug stability guidelines that are stipulated for drug products and how to design a product stability testing plan that can be applied to new or modified products in the pharmaceutical, biotechnology and medical device industries.
In this webinar you will learn how to create detailed quality agreements (QA Agreements) for key suppliers, particularly those for outsourced processes, and to understand which of your suppliers should have these agreements to meet the expectations of the FDA and ISO 13485:2016 and MDSAP. The agreements discussed will meet the expectations of the GHTF and NBOG supplier guidance documents which are now an expectation of both the FDA and most ISO 13485 auditors. These supplier QA agreements can be an important part of demonstrating that you have control of your key suppliers.
This webinar will make your understand regulatory requirements of veterinary medical device. How to differentiate regulations of human and veterinary medical devices, manufacturing requirements, safety standards, labelling requirements, how to draft the SOPs covering material intake, production, quality control, packing, distribution and sales.
Attend this webinar to learn the regulatory expectations for data integrity during CGMP inspections. The course will review examples of data integrity pitfalls, part 11 compliance data integrity issues, FDA citations related to data integrity. It will teach you how to improve data integrity in a laboratory environment.
This CAPA training program will provide an understanding of FDA and ISO requirements, steps in CAPA process and the challenges associated to root cause analysis. Attendees will learn the tools and quality data sources to use during root cause analysis investigation.
In this 510(k) submission process webinar attendees will learn the different types of 510(k)s, 21 required elements in the traditional 510(k) and how are they addressed and documented. Also attendees will learn software / firmware requirements, De Novo submission for obtaining marketing clearance for medical devices in the U.S.