Ginette M Collazo
Product Id: 704107
This training program will offer attendees an understanding of human errors in GMP related environments, factors and causes, and control measures to be put in place to reduce the same.
Product Id: 705157
This process capability analysis webinar will discuss the relationship between variation and accuracy, and process yield, short term versus long term variation, non-normal distributions and how to perform a process capability study.
Product Id: 704847
In this training program, attendees will understand when and why to apply DOE (design of experiments). They will also learn to identify and interpret significant factor effects and 2-factor interactions and develop predictive models to explain and optimize process/product behavior. Applying efficient fractional factorial designs in screening experiments will also be discussed.
Product Id: 705338
This webinar will teach you how to identify potential process problems and avoid process interactions through effective process mapping. It will cover steps to create a fishbone diagram including its purpose, advantages and how to present it.
Product Id: 705085
This training program will highlight common issues that occur over time with material compliance programs, and demonstrate how to address them. This can result in a more effective and responsive material compliance effort for your company.
Product Id: 705333
This webinar will explain how to create Failure Mode Effects Analysis (FMEA) by combining Effective Information Collection (EIC), Process Reliability Modeling (PRM) and Failure Mode Effect Criticality Analysis (FMECA). It will also cover the methods for determining root causes of process problems and effective tools for repair of ineffective processes.
Product Id: 705334
This webinar will discuss in detail Process Reliability Modeling (PRM) method including its history, the process, validation, and results of effective management, sigma score and customer satisfaction. Attendees will learn how to convert qualitative information into quantitative data to determine process and system reliability.
Product Id: 705153
This webinar will define human factors engineering and its role in the success of new product development. The session will use real world examples to demonstrate how human factors engineering makes a significant.
Product Id: 704839
This training program will offer an introduction to measurement systems, and cover implementation of Gage R&R studies, linearity assessment, attribute measurement systems, and non-replicable systems.
Product Id: 704830
In this training program, participants will gain awareness of the overall methodology for setting reliability targets, estimating product reliability from test data and/or field data, and determining whether or not reliability targets are achieved. Participants will also learn how to calculate sample sizes for reliability testing.
Product Id: 705336
This webinar will explain how to use ANSI/ASQ Z1.4 to define sampling plans including its switching rules. It will also offer an inspection plan format that reduces the sequential sampling plan to ten or fewer rows in most cases.
Product Id: 704695
This aerospace program management training will focus on identifying the critical components that a project or program manager must be aware of and how to develop plans for effectively and efficiently dealing with them. The webinar will include interactive dialogs to ensure participant understanding and to contribute to the content of the offering.
Product Id: 705227
This training program will provide an overview of Measurement Systems Analysis (MSA) including best practices for performing MSA. It will help attendees understand difference between calibration and precision, components of gage capability, procedure for a gage reproducibility and repeatability study and much more.
Product Id: 705171
Learn how the FMEA and control plan can be combined to create a dynamic control plan, a living document that helps to drive continual improvement.
Product Id: 705190
EU REACH can be confusing and many in the US seek a more solid understanding of it. In this introductory webinar, participants will be introduced to the important terms and concepts of the directive. They will obtain a basic knowledge of what RoHS is about and if they need to learn more.
Charles H Paul
Product Id: 705109
Lean is not a quick fix for doing more with less and doing it in half the time – it is not something you undertake to realize short-term improvements – it is on the other hand, a new way of thinking about your business and a new way of executing business activities. This virtual training and the others in the series will lead you through the journey of lean from its inception through complete implementation.
Product Id: 705127
This training program will focus on NEPA (National Environmental Policy Act) national environmental policies and goals. It will also discuss provisions for governmental agencies to effect NEPA, establishing the QEC in the Executive Office of the President.
Product Id: 705068
This European directive is very confusing for many and since it is European there are many in the US that need a clearer understanding of the directive. In this introductory webinar, attendees will be introduced to the important terms and concepts of the directive. Those who attend will obtain basic knowledge to understand what RoHS is about and if they need to learn more.
Product Id: 705028
This training program will introduce different methods to improve existing declaration collection efforts. It will propose several practical methods a manufacturer might implement to make their material compliance efforts more effective.
Product Id: 704988
This training program will discuss the manufacturer’s obligations mentioned in the EN 50581, 2012 guidance document. The topics in the guidance document will be explored from the perspective of a US manufacturer.